Can I connect IEC C7/C8 (Figure-8) to Molex 4-pin?

IEC C7/C8 (Figure-8) and Molex 4-pin are not directly compatible.

Do I need an adapter for IEC C7/C8 (Figure-8) to Molex 4-pin?

No, IEC C7/C8 (Figure-8) and Molex 4-pin can be connected directly without an adapter.

Will connecting IEC C7/C8 (Figure-8) to Molex 4-pin cause signal loss?

No significant signal degradation is expected when connecting IEC C7/C8 (Figure-8) to Molex 4-pin.

IEC C7/C8 (Figure-8) ↔ Molex 4-pin

Vérification de compatibilité et analyse du chemin de signal

Adaptateur Requis

Ces connecteurs ne sont pas directement compatibles. Un adaptateur ou câble convertisseur est nécessaire.

Chemin de Signal

IEC C7/C8 (Figure-8) Power

Molex 4-pin Power

IEC C7/C8 (Figure-8)

Famille Power

Facteur de Forme Figure-8 flat

Nombre de Broches 2

Réversible Oui

Molex 4-pin

Famille Power

Facteur de Forme Rectangular nylon 4-pin

Nombre de Broches 4

Réversible Non

Notes

IEC C7/C8 (Figure-8) to Molex 4-pin: Different power connector standards are generally not interchangeable due to voltage, current, and pin compatibility differences. Using the wrong power connector can damage equipment. The IEC C7/C8 (Figure-8) (Power) and Molex 4-pin (Power) share the same connector family.