Can I connect SATA Power to SAS (Serial Attached SCSI)?

SATA Power and SAS (Serial Attached SCSI) are not directly compatible. You will need a Active adapter to connect them.

Do I need an adapter for SATA Power to SAS (Serial Attached SCSI)?

Yes, you need a SATA Power to SAS (Serial Attached SCSI) adapter to connect SATA Power to SAS (Serial Attached SCSI).

Will connecting SATA Power to SAS (Serial Attached SCSI) cause signal loss?

No significant signal degradation is expected when connecting SATA Power to SAS (Serial Attached SCSI).

SATA Power ↔ SAS (Serial Attached SCSI)

Проверка совместимости и анализ сигнального пути

Требуется адаптер

Эти разъёмы напрямую несовместимы. Нужен адаптер или конвертер.

Рекомендуется: SATA Power to SAS (Serial Attached SCSI) adapter

Сигнальный путь

SATA Power Unknown

Адаптер

SAS (Serial Attached SCSI) Unknown

SATA Power

Семейство Storage

Форм-фактор L-shaped wide flat

Количество контактов 15

Обратимый Нет

SAS (Serial Attached SCSI)

Семейство Storage

Форм-фактор L-shaped (wider than SATA)

Количество контактов 29

Обратимый Нет

Примечания

SATA Power to SAS (Serial Attached SCSI): Both are storage connectors but may use different interfaces. An adapter or enclosure may bridge them, but speed will be limited by the slower interface. The SATA Power (Storage) and SAS (Serial Attached SCSI) (Storage) share the same connector family.