Can I connect U.2 (SFF-8639) to SAS (Serial Attached SCSI)?

U.2 (SFF-8639) and SAS (Serial Attached SCSI) are not directly compatible. You will need a Active adapter to connect them.

Do I need an adapter for U.2 (SFF-8639) to SAS (Serial Attached SCSI)?

Yes, you need a U.2 (SFF-8639) to SAS (Serial Attached SCSI) adapter to connect U.2 (SFF-8639) to SAS (Serial Attached SCSI).

Will connecting U.2 (SFF-8639) to SAS (Serial Attached SCSI) cause signal loss?

No significant signal degradation is expected when connecting U.2 (SFF-8639) to SAS (Serial Attached SCSI).

U.2 (SFF-8639) ↔ SAS (Serial Attached SCSI)

Проверка совместимости и анализ сигнального пути

Требуется адаптер

Эти разъёмы напрямую несовместимы. Нужен адаптер или конвертер.

Рекомендуется: U.2 (SFF-8639) to SAS (Serial Attached SCSI) adapter

Сигнальный путь

U.2 (SFF-8639) Unknown

Адаптер

SAS (Serial Attached SCSI) Unknown

U.2 (SFF-8639)

Семейство Storage

Форм-фактор Dual-port wide

Количество контактов 68

Обратимый Нет

SAS (Serial Attached SCSI)

Семейство Storage

Форм-фактор L-shaped (wider than SATA)

Количество контактов 29

Обратимый Нет

Примечания

U.2 (SFF-8639) to SAS (Serial Attached SCSI): Both are storage connectors but may use different interfaces. An adapter or enclosure may bridge them, but speed will be limited by the slower interface. The U.2 (SFF-8639) (Storage) and SAS (Serial Attached SCSI) (Storage) share the same connector family.