Can I connect IEC C7/C8 (Figure-8) to HD-SDI (BNC)?

IEC C7/C8 (Figure-8) and HD-SDI (BNC) are not directly compatible.

Do I need an adapter for IEC C7/C8 (Figure-8) to HD-SDI (BNC)?

No, IEC C7/C8 (Figure-8) and HD-SDI (BNC) can be connected directly without an adapter.

Will connecting IEC C7/C8 (Figure-8) to HD-SDI (BNC) cause signal loss?

No significant signal degradation is expected when connecting IEC C7/C8 (Figure-8) to HD-SDI (BNC).

IEC C7/C8 (Figure-8) ↔ HD-SDI (BNC)

Compatibility check and signal path analysis

Adapter Required

These connectors are not directly compatible. An adapter or converter cable is needed.

Signal Path

IEC C7/C8 (Figure-8) Power

HD-SDI (BNC) Unknown

IEC C7/C8 (Figure-8)

Family Power

Form Factor Figure-8 flat

Pin Count 2

Reversible Yes

HD-SDI (BNC)

Family Legacy Video

Form Factor Circular bayonet (75Ω)

Pin Count 1

Reversible No

Notes

IEC C7/C8 (Figure-8) to HD-SDI (BNC): Power and video connectors serve completely different purposes. The IEC C7/C8 (Figure-8) (Power) and HD-SDI (BNC) (Legacy Video) are from different connector families.