Can I connect IEC C7/C8 (Figure-8) to U.2 (SFF-8639)?

IEC C7/C8 (Figure-8) and U.2 (SFF-8639) are not directly compatible.

Do I need an adapter for IEC C7/C8 (Figure-8) to U.2 (SFF-8639)?

No, IEC C7/C8 (Figure-8) and U.2 (SFF-8639) can be connected directly without an adapter.

Will connecting IEC C7/C8 (Figure-8) to U.2 (SFF-8639) cause signal loss?

No significant signal degradation is expected when connecting IEC C7/C8 (Figure-8) to U.2 (SFF-8639).

IEC C7/C8 (Figure-8) ↔ U.2 (SFF-8639)

Compatibility check and signal path analysis

Adapter Required

These connectors are not directly compatible. An adapter or converter cable is needed.

Signal Path

IEC C7/C8 (Figure-8) Power

U.2 (SFF-8639) Unknown

IEC C7/C8 (Figure-8)

Family Power

Form Factor Figure-8 flat

Pin Count 2

Reversible Yes

U.2 (SFF-8639)

Family Storage

Form Factor Dual-port wide

Pin Count 68

Reversible No

Notes

IEC C7/C8 (Figure-8) to U.2 (SFF-8639): Storage and power connectors serve different purposes, though some storage connectors (SATA) include power delivery pins. The IEC C7/C8 (Figure-8) (Power) and U.2 (SFF-8639) (Storage) are from different connector families.